Bürkert - Perto de você
Escritório /1
    • Sede social
      Burkert-Contromatic Brasil Ltda.
      Rua Américo Brasiliense, 2069
      Chacara Santo Antonio
      04715-005 São Paulo - SP
      Telefone +55 11 2186 1155
      Fax +55 11 2186 1165
      E-mail pbagngb.oe@ohexreg.pbz
  • Sede social
  • Sede
  • Systemhaus
  • Distribuidor
  • Escritório
  • Planta
  • Centro de logística
bürkert
 

    This article number 00%number% is only available for a limited time.

    Defined wearing parts kits might still be available.

    Please contact us regarding a successor product.

    Válvula de êmbolo de 2/2 vias servocomandada

    Tipo 2400 / Nº produto 214572

    Produkt-Foto Typ 2400

    The depiction of the products may differ from the actual specific design.

    • Produkt-Foto Typ 2400
    • 9000131292.jpeg
    • 9000219076.jpeg
    • 9000219087.jpeg
    • 9000099170.jpeg

    2/2-way high pressure solenoid valve

    • Sistema de bobina encaixado por cima
    • Versão de alta temperatura, até 250 bar, até DN 12
    • Caixa em aço inoxidável

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Descrição do produto

    A válvula pilotada tipo 2400 possui um servopistão com comando-piloto de 2 vias. Ela foi concebida para altas pressões. A particularidade desta conceção de válvula reside na configuração do assento e do elemento vedante. A vedação radial suplementar garante a máxima estanqueidade. O elemento vedante cónico do comando-piloto permite ligar pressões altas com uma potência da bobina relativamente baixa.


    Códigos de mercadoria
    84818073
    País
    DE

    Características técnicas

    Nome
    Valor
    Unidade
    Type 2400
    Operation servo-controlled
    Actuator type Plunger valve
    Main valve operating principle Globe valve
    Switch function on/off
    Media separation No
    Valve function A - normally closed - inlet port 1 (P/NC)
    Fluidic port connection number 2
    Valve function number of switching positions 2
    Valve function manual actuation No
    Flow Above seat
    Nominal pressure min 1 bar
    Nominal pressure max (gas) 250 bar
    Nominal pressure max (liquid) 250 bar
    Main valve orifice 1 (P) (mm) 8 mm
    Main valve orifice 1 (inch) 5/16 inch
    Kv value (water) 1 m3/h
    QNn value (gas) 1070 l/min
    Main valve wetted material Stainless steel
    Port connection 1 type Inner thread
    Port connection 1 thread type G
    Port connection 1 thread marking 3/8
    Port connection 2 type Inner thread
    Port connection 2 thread type G
    Port connection 2 thread marking 3/8
    Valve seat material Stainless steel
    Medium-contacting part core material Stainless steel
    Medium-contacting part stopper material Stainless steel
    Seat seal material category Plastics
    Seat seal material PEEK (Polyetheretherketone)
    Sealing toward outside material FKM (Fluor rubber)
    Temperature environment max 55 °C
    Temperature medium min -10 °C
    Temperature medium max 80 °C
    Voltage / rated voltage 230 V
    Voltage / rated voltage 230 V
    Voltage tolerance negative 10 %
    Voltage tolerance positive 10 %
    Voltage frequency 50 Hz
    AC voltage Yes
    DC voltage No
    Battery voltage No
    Rated power consumption 20 W
    inrush power consumption AC 85 V·A
    Rated power AC 48 V·A
    Electrical connection sort Plug pattern form A according to DIN EN 175301-803
    Electrical connection number of contacts 2 + Grounding conductor
    Electrical connection position in direction of flow left
    Protection type (IP max. with suitable connector) 65
    Coil type placed on top
    Coil insulation material category (encasement) Plastics
    Coil insulation material (encasement) Epoxy
    Coil wiring overvoltage protection without
    Coil wiring rectifier No
    Coil wiring polarity recovery diode No
    Thermal insulation class of the actuator H
    Nominal operation/Duty cycle 100 %
    Switch time open min 100 ms
    Switch time open max. 200 ms
    Switch time close min 300 ms
    Switch time close max. 500 ms
    Valve setting opening time No
    Valve setting closing time No
    Back-pressure-resistant version No
    Vacuum version No
    Analysis version No
    Oxygen version No
    Oil burner valve No
    Steam version No
    Pilot control orifice (mm) 0.9 mm
    Pilot control seal material PEEK (Polyetheretherketone)
    Low-noise version No
    Main valve with integrated screen No
    Installation length 65 mm
    Without mounting No
    Valve construction Valve complete
    Peso 1,350000 kg
    Exibir tabela completa Recolher tabela

    Downloads

    Folha de dados

    Descrição
    Tam.arquivo
    Idioma / País
    DTS Type 2400 data sheet | servo-assisted piston valve 247,6 kB EN / EU
    DTS Type 2400 data sheet | servo-assisted piston valve [US units] 247,3 kB EN / US
    DTS Typ 2400 Datenblatt | servogesteuertes Kolbenventil 249,4 kB DE / DE
    DTS Type 2400 fiche technique | Électrovanne assistée à piston pour hautes pressions 357,3 kB FR / FR

    Manual de instruções

    Descrição
    Tam.arquivo
    Idioma / País
    MAN Additional manual Type 0721 | Type X, IIC 2G Ex mb or IIC 2G Ex e mb ATEX-approval 598,2 kB EN / EU
    MAN Operating Instructions Type 2400 | 2/2-way solenoid-operated valve 310,6 kB ,EN,FR,DE,IT,ES / EU
    MAN Bedienungsanleitung Typ 2400 | 2/2-Wege-Magnetventil, DN5 /DN8 655,4 kB DE / DE
    MAN Manuel supplémentaire Type 0407 | Type X, IIC 2G Ex mb, IIC2G Ex e mb homologation ATEX 601,8 kB DE / FR
    MAN Zusatzanleitung Typ 0721 | Type X, IIC 2G Ex mb bzw. IIC 2GEx e mb ATEX-Zulassung 586 kB DE / DE

    Declaração UE

    Descrição
    Tam.arquivo
    Idioma / País
    ABD EU-DoC|EU Declaration 1,7 MB EN,FR,DE

    Minha Lista de Comparação